Friday, June 8, 2012

ONKYO TX-NR818

This Onkyo network receiver is a winner in three areas. Firstly, its video performance is unrivalled. An HQV® Vida™ VHD1900 processor upscales content to 1080p, with Qdeo™ technology taking full HD out to an eye-popping 4K. An ISF system calibrates video from all inputs to industry standards, and the resulting picture is spectacular. Secondly, audio performance is unmatched, as proven by THX® Select2 Plus™
certification. The receiver delivers power effortlessly through three-stage inverted Darlington circuitry and 192 kHz/24-bit DACs. Finally, you get more setup flexibility. There are eight HDMI® inputs—including an MHL for smart phones—and two outputs. Two USB ports connect iPod®/iPhone® and LAN adaptor, enabling wireless PC and online audio. Three mind-blowing sound expansion systems are included—Audyssey DSX®, DTS Neo:X™, and Dolby® Pro Logic® IIz—assisted by Audyssey MultEQ XT32 room correction. Digital crossover processing, front channel bi-amping capability, and three-zone audio distribution grant the freedom to customize. With new InstaPrevue™ input selection technology and intuitive system control via iPhone and Android phone, now is the time to upgrade to an Onkyo.

Special Features

  • 8in/2out HDMI Support for 3D Video and Audio Return Channel
  • THX Select2 Plus Certified
  • Network Capability Delivers Internet Radio and Network Streaming
  • Dual Core Video Engine w/ HQV Vida and Marvell Qdeo™ Processing
  • MHL™ (Mobile High-Definition Link) for Smart Phone Content on HDTV
  • Picture-in-Picture Input Source Preview with InstaPrevue™ Technology
  • Direct Digital Connection of iPod/iPhone via Front-Panel USB Port
  • Onkyo Remote App for iPod/iPhone
  • DTS Neo:X, Dolby® Pro Logic® IIz and Audyssey DSX Add New Dimensions to Surround Sound
  • Hybrid Standby Function to Reduce Power Consumption


Power Output -
All Channels 135 W (8 ohms, 20 Hz-20 kHz,
0.08%, 2 channels driven, FTC)
Front L/R 135 W (8 ohms, 20 Hz-20 kHz,
0.08%, 2 channels driven, FTC)
125 W + 125 W (6 ohms, 1 kHz, 0.7%,
2 channels driven, FTC)
Center 135 W (8 ohms, 20 Hz-20 kHz,
0.08%, 2 channels driven, FTC)
125 W + 125 W (6 ohms, 1 kHz, 0.7%,
2 channels driven, FTC)
Surround L/R 135 W (8 ohms, 20 Hz-20 kHz,
0.08%, 2 channels driven, FTC)
125 W + 125 W (6 ohms, 1 kHz, 0.7%,
2 channels driven, FTC)
Surround Back L/R 135 W (8 ohms, 20 Hz-20 kHz,
0.08%, 2 channels driven, FTC)
125 W + 125 W (6 ohms, 1 kHz, 0.7%,
2 channels driven, FTC)
Dynamic Power 300 W (3 ohms, 1 ch)
250 W (4 ohms, 1 ch)
150 W (8 ohms, 1 ch)
THD+N (Total Harmonic Distortion + Noise) 0.08% (20 Hz-20 kHz, Rated power)
Damping Factor 60 (Front, 1 kHz, 8 ohms)
Input Sensitivity and Impedance 200 mV/47 k-ohms (Line)
2.5 mV/47 k-ohms (Phono MM)
Output Level and Impedance 200 mV/470 ohms (Line out)
Phono Overload 70 mV (MM, 1 kHz, 0.5%)
Frequency Response 5 Hz-100 kHz/+1 dB, -3 dB (DSP bypass)
Tone Control ±10 dB, 50 Hz (Bass)
±10 dB, 20 kHz (Treble)
Signal-to-Noise Ratio 110 dB (Line, IHF-A)
80 dB (Phono MM, IHF-A)
Speaker Impedance 4 Ohms–16 Ohms or 6 Ohms–16 Ohms

Video Section

Input Sensitivity/Output Level and Impedance -
Video 1 Vp-p/75 ohms (Component)
0.7 Vp-p/75 ohms (Component PB/CB, PR/CR)
1 Vp-p/75 ohms (Composite)
Component Video Frequency Response 5 Hz–100 MHz, -3dB

Tuner Section

Tuning Frequency Range -
FM 87.5 MHz–107.9 MHz
AM 530 kHz–1,710 kHz
FM/AM Preset Memory 40 stations

General

Power Supply AC 120 V, 60 Hz
Power Consumption 8.1A
Standby Power Consumption 0.1W
Dimensions (W x H x D) 17 1/8" x 7 13/16" x 17 1/8" (435 x 198.5 x 435.5 mm)
Weight 40.3 lbs (18.3 kg)

No comments:

Post a Comment